Why does the bronzing machine carbonize? The people who often use the bronzing machine will know that the hot melt glue machine will be used for a long time in the future to see a layer of black material around the glue barrel. These are some carbides. Many people will not know how these carbides are composed, and how we should prevent too much carbides.

People who often use hot melt glue machines in bronzing machines will know that a layer of dark matter will be seen around the glue bucket after a long time of painting. Here are some carbides, and a lot of people are confused about how these carbides are formed. How can we prevent the production of too many carbides?

In fact, it can be analyzed from the following aspects. The main reasons for hot melt glue carbonization and even the production of gel are: the temperature of the glue box is too high, the temperature is faulty, the actual temperature is lower than the apparent temperature, perhaps the temperature is too high to control the effect, the rubber layer carbonization on the outer surface of the glue box, and the thermal stability of the glue itself is not good. There are two different kinds of hot melt glue in the rubber box of the bronzing machine.

Based on the above reasons, the following aspects should be met in the daily gluing process: the gluing temperature should be set according to the conventional technical parameter values; When there are abnormal phenomena such as carbonization, the difference between the temperature control and the actual temperature should be checked; The lid of the rubber box should be closed at any time to avoid contact between the external high temperature hot melt glue and fresh air, thus speeding up oxidation. When using a small amount of glue for a long time, the amount of hot melt glue in the glue box should not be increased too much, and should be increased by one-third to one-half, and repeatedly maintained.

The adhesive interlining of the bronzing machine is made of Xu cloth hot melt adhesive evenly coated on the surface of the fabric. To use, the bonded interlining is cut to the desired shape and size by hot pressing the hot glued side to the opposite side of the other fabric (fabric). It is lined in the inner layer of clothing as the skeleton of clothing, simplifying the processing technology and time of clothing, making it light, beautiful, comfortable, form-preserving, washable and durable.